17
Electrode
Ignitor
panel
Electrode wire
Burner
2. Attach ignitor to ignitor panel using two #8x1/2”
self-tap screws.
Ignitor
Smaller end
pointing down.
Ignitor
panel
3. Place the ignitor cover over the ignitor and attach
to ignitor panel using two #10x1/2” self-tap
screws. Press ignitor knob onto ignitor.
Ignitor cover
Ignitor
knob
If your model features rotary ignition, follow
these instructions.
Electrode/Ignitor Assembly Instructions
1. Insert the electrode wire into the side of the
cooker stand, behind the ignitor panel. Secure the
electrode to the stand with one #10x1/2” self-tap
screw. The end of the electrode wire should be
above the edge of the burner.
NOTE: Tip of electrode wire should be 1/16”-1/8”
from burner for proper ignition. Bend electrode
wire slightly if necessary.