background image

WARNING

CALIFORNIA PROPOSITION 65
1. Combustion by-products produced when using 
this product contain chemicals known to the State of 
California to cause cancer, birth defects, and other 
reproductive harm.
2. This product contains chemicals, including lead 
and lead compounds, known to the State of 
California to cause cancer, birth defects or other 
reproductive harm. 

Wash your hands after handling this product.

Installation Safety Precautions

Use grill, as purchased, only with LP (propane) gas and the 
regulator/valve assembly supplied. If your grill is Dual Fuel ready,
a conversion kit must be purchased for use with natural gas.

Grill installation must conform with local codes, or in their 
absence of local codes, with either the 

National Fuel Gas 

Code, ANSI Z223.1/ NFPA 54, Natural Gas and Propane 
Installation Code, CSA B149.1, or Propane Storage and 
Handling Code, B149.2, or the Standard for Recreational 
Vehicles, ANSI A 119.2/NFPA 1192, and CSA Z240 RV Series, 
Recreational Vehicle Code, as applicable. 

• All electrical accessories (such as rotisserie) must be 

electrically grounded in accordance with local codes, or

 

National Electrical Code, ANSI / NFPA 70 or Canadian 
Electrical Code, CSA C22.1.

  Keep any electrical cords and/or 

fuel supply hoses away from any hot surfaces.

• This grill is safety certified for use in the United States and/or 

Canada only. Do not modify for use in any other location. 
Modification will result in a safety hazard.

WARNING

Do not attempt to repair or alter the 
hose/valve/regulator for any “assumed” defect. Any 
modification to this assembly will void your warranty 
and create the risk of a gas leak and fire. Use only 
authorized replacement parts supplied by 
manufacturer.

CAUTION

Using pots larger than 6 quarts in capacity could 
exceed weight limit of the
side burner shelf

resulting in failure
of grill cart
components.

or side shelf,

3  

Summary of Contents for 463211511

































Reviews: