Installing the Wall Dock
(3-gang Installation)
In some installations it may be desirable to mount a single gang control
keypad next to the A0315. To accomplish this, the single gang trim plate
can be installed next to the A0315 in a 3-gang junction box.
Follow the steps below:
4
3
Completed Installation
7
See attachment
detail on previous page
Installation Steps
1. Connect all wiring. Use the correct
installation tools: J-110 tool, or
1014 crimp tool.
2. Install keypad and single-gang
trim plate in the far left position
of the 3-gang junction box.
(See details on page 3)
3. Leave off the right side
flange and trim piece.
4. Install the iPod dock in the
left side of the 3-gang j-box.
It will overlap and snap into
the single gang trim plate.
(See page 5 for details)
