1) Be sure you have connected the CAT5 cable correctly. Follow the
TIA-568A standard at both ends. Incorrect wiring can cause distorted
sound or prevent the system from working at all!
2) Be sure you have connected the speakers in phase. Follow the label
on the product. Out of phase speakers can rob the system of its
bass. Especially when driving dual-voice-coil speakers.
3) Trouble with IR control?
a. Make sure you are using the correct remote control. The A0315 will
only respond to IR signals from the Apple Remote produced by Apple
Computer or the A0505 produced by Channel Vision. Other 3rd party
remote controls are not supported.
b. Check the batteries in the remote control and change them if
necessary.
4) The A0315 is designed to charge the iPod
(see compatibility notes on
page3). When the iPod is not playing music, the screen should
indicate that the iPod is being charged. If this does not occur, make
sure the power is reaching the volume control keypad (press the
volume buttons to see if the LED indicators light up).
5) Observe wiring distance specifications. The maximum
recommended wire length between the wall dock and CAT5 audio
hub is 250 feet. Although the A0315 may work at greater distances,
extreme distances are not recommended because erratic
performance may result due to the power loss caused by the CAT5
wire.
6) If you are experiencing problems with your iPod that occur even
when it is not docked in the A0315, then please contact Apple
customer service for support.
7) If you need additional help troubleshooting the A0315 please contact
Channel Vision technical support or check our website for more
details: www.channelvision.com.
Connection Tips and Troubleshooting
11
