W260F8U/W320F8U/W370F8U
PAGE 17
TV Rating
Block programs by their rating, content or both.
1)Press
【
P
+
】
/
【
P
-
】
to select these options.
2)Press
【
OK
】
to block or unblock.
Using the PC Setting menu
(for PC mode only)
1) Press
【
MENU
】
and then use
【
V+
】
/
【
V-
】
to select the PC Setting menu.
2) Press
【
P+
】
/
【
P
-
】
to make the desired adjustment. Five modes for you to choose: Auto
Tracking, Clock, Phase, H position, V position.
●
Auto Tracking
To adjust automatically the picture’s clock, phase, H
Position andV Position to get the best visual effect.
●
Phase
To adjust pictures’ sampling phase in PC mode
●
Clock
To adjust pictures’ sampling frequency .
●
H Position
To adjust picture’s position horizontally in PC mode.
●
V Position
To
adjust picture’s position vertically in PC mode.
Note
:
In the menu, gray items means invalid to operate in the current mode.
OTHER FUNCTIONS INTRODUCTION
Standby Mode
Press
【
】
on the TV panel/Remote Control, the LCD TV will store the current setup and
enter into standby mode with a red indicator light. To Power on the LCD TV, press the button
again.
Signal Switch
Press
【
AV
】
on the remote control to select the signal sources orderly. They are TV, AV1,
AV2, YPbPr, PC, and DVI.
The upper-right corner of the screen will display the corresponding information.
Channel Selection
Press
【
CH+
】
/
【
CH-
】
on the panel or
【
P
+
】
/
【
P
-
】
on the remote control to change
the channels. If a channel number is in SKIP ON mode, the next channel will be displayed.
A maximum of three channel numbers can be input at one time on the remote control.
