6
Pairing of remote control
Bluetooth remote control is adopted in this device, the remote control can be used after being paired with the device.When start up the device for the first
time and the main unit is not paired with the remote control, please make the pairing by following the steps as below.
a
．
Press the “ON/OFF”key of main unit to start up the device;
b
．
Carry the remote control towards the device and hold it within 50 cm right ahead the main unit, press the “Menu”key and “Volume -”key at the
same time and hold for more than three seconds;
c
．
Remote control indicator will flash quickly and the remote control will enter the pairing mode;
d
．
When the remote control indicator lights up for long and the screen will display as Fig 7, loosen the keys and wait for connection.
e．
The indicator of remoter control will go out, and the tip of “Paired” is displayed in the screen, that means the pairing is completed;
f．
The remote control can be used to control the device only when the pairing is completed. In case the pairing is failed, it is required to make the
pairing again.
Fig 7 In pairing
Fig 8 Paired
