9
This section takes the installation method of desktop front
projection as an example to explain the picture adjustment for
users' reference.
a. Connect the power supply and start the main unit;
b. According to the picture display, adjust the size and position of
the picture by moving the main unit forward, backward, left
and right or rotating the height adjustment kickstand.
c. Afterwards, use the Left arrow and Right arrow to make fine
adjustment: Use the “Left/Right” key in the remote control to select
the “Left/Right” arrow
→
press the “OK”key time after time to adjust
the image definition into the optimum;
d. In case the definition still cannot reach the ideal status, it is required to
repeat the step b and c.
3.2.2 Focus Adjustment
a．
Call up the electric focusing screen through the user menu: long press
the "Menu" key of the remote control
→
select Display Setting
→
select the Electric Focusing;
b. Use Up arrow and Down arrow to make rough adjustment: Use the
“Up/Down” key in the remote control to select the “Up/Down”
arrow
→
press the “OK”key time after time to adjust the image into
approximately clear (judging by observing the definition in the center
of the image);
3.2
Picture Adjustment
3.2.1
Adjust Image Position
Fig. 14 Focus adjusting image
