Champion Industries, Inc.
P. O. Box 4149, Winston-Salem, NC 27115
Tel: 336/661/1556 Fax: 336/661-1979
www.championindustries.com
2674 N. Service Road,
Jordan Station, Ontario, Canada L0R 1S0
Tel: 905/562-4195 Fax: 905/562-4618
(1M) 1/06 Printed in U.S.A.
SPECIFICATIONS
MODEL UTM-10 POT, PAN &
UTENSIL WASHER
Washer
Automatic washing machine designed to wash all pots, pans and utensils commonly
used in baking and cooking operations.
Cabinet
36" wide x 36" deep x 78-1/8" high. Clearance height: 83" (96-1/8" with optional
infrared gas heated rinse tank). Door Opening: 29" wide x 28-1/2" high. Constructed
of 12, 14 & 16 gauge, type 304 #3 finish, stainless steel. All seams tig-welded,
cleaned and polished.
Door
Front-loading, hinged door design for easy loading and unloading. Door opens to
create a convenient, space-saving drain table. Door is interlocked with limit switch to
prevent machine operation while door is open. Door construction: 16 gauge, type 304
# finish, stainless steel.
Recirculating Wash Tank
Heated by one (1) 6 kW 208/240 at 480 volt electric immersion heater, thermostatically
controlled wash temperature and low water protection system. 25 gallons, 14 gauge
stainless steel, sloped to drain. Infrared gas and steam heating options available.
Wash Tank Filter
Perforated, stainless steel basket type designed for increased effectiveness and easy
cleaning without emptying wash tank.
Wash Tank Fill Valve
Size 1/2" brass material, solenoid type, automatic.
Wash Tank Drain Valve
Size 1-1/4" brass material, gate type for manual or electrically operated ball valve for
automatic option.
Optional Pumped Drain
Automatic pump operation for elevated drain locations. Complete with 1/14 HP 120
and Overflow
volt 1 phase drain pump. Wash tank completely drains when power is turned off.
Wash Pump
5 Hp, 208/240 or 480 volt, 1 phase or 3 phase, 60 cycle. Close coupled; 100 gallons
per minute at 35 to 45 psi, mounted on 12 gauge stainless steel formed channel base.
Rotating Wash
Water driven, quick release, stainless steel jets, with removable end caps for quick
Hub Assembly
and easy cleaning.
Sanitizing Rinse Tank
Stainless steel, 6 gallon capacity, with one (1) 6 Kw 208/240 or 480 volt electric
booster heater to provide 180°/190° F hot sanitizing rinse. Uses 2.8 gallons per 22
second cycle. Infrared gas and steam coil heating options available.
Water Supply Valve
Size 1/2" brass material, solenoid type, automatic.
Final Rinse Piping
Type 304 stainless steel tubing with brass compression fittings and brass or
optional stainless steel full cone rinse jets.
Control and
120 volt control circuit with push pad operation of “power on,” “stop” and “short,
Information Center
medium or long wash cycles.” A digital display indicates “time remaining” for each
cycle. LED’s indicate wash, rinse and unload functions. A buzzer is also included to
provide an audible indication of time to unload. A pre-programmed circuit board
allows the push pad to be used as a “diagnostic center” by displaying “error codes”
for ease of troubleshooting. Moisture resistant gauges measure Wash Temperature,
Wash Pressure and Rinse Temperature.
Wash Down Spray Hose
Externally mounted rinse hose with spray gun for easy cleaning and maintenance
of machine.
