background image

Pot, Pan and 
Utensil Washer

MODEL UTM-10

MODEL UTM-10 WASHER

Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice.

Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC 27115 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com

2674 N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 • 905/562-4195 • Fax: 905/562-4618

Dimensions shown in inches

36"

65-1/4"

29-1/4"

6" Dia. Vent

Hot Water

Connection

Wash Down

Hose With

Spray Nozzle

Rinse Tank

Drain Valve

Adjustable Legs

SPECIFICATIONS

Machine Construction

12, 14, & 16 gauge stainless steel.

All seams Heliarc welded.

Door

Stainless steel, drop-down door for easy

loading and unloading.

Rinse Tank

Stainless Steel with electric, infrared gas or

steam coil booster heater to provide 180°/190°
hot sanitizing rinse. Uses 2.8 gallons per 
22 second cycle.

Recirculating Wash Tank

Heated by one (1) 6 kW  208/240 at 480

volt electric immersion heater, thermostatically
controlled wash temperature and low water
protection system. 25 gallons, 14 gauge
stainless steel, sloped to drain. Infrared gas
and steam heating options available.

Filter

Perforated, removable, stainless steel baskets.

Water Pump

5 H.P., 208/240 or 440/480 volt, 1 phase or

3 phase, 60 cycle with output of 100
gallons per minute at 35 to 45 P.S.I.

Digital Control & Information Center

110 volt control circuit with push pad

operation of “power on”, “stop” and “short,
medium or long wash cycles”. A digital
display indicates “time remaining” for each
cycle. LED’s indicate wash, rinse and unload
functions. A buzzer is also included to
provide an audible indication of time to
unload. A pre-programmed circuit board
allows the push pad to be used as
a “diagnostic center” by displaying “error
codes” for ease of troubleshooting.

Gauges

Special moisture resistant design. Wash

temperature, rinse temperature, wash jet
pressure.

Racks

Stainless Steel rod built to match specific

washing requirements.

83"

78-1/8"

36"

29"

Door

Opening

Electrical
Control 
Panel

Rinse Thermometer

Wash Pressure Gauge

Wash Thermometer

Digital Control and 
Information Center

Overflow
Connection

Wash Pump

28-1/2"

Door

Opening

37-1/2"

Lift

Height

37-1/2"

Summary of Contents for UTM-10

Page 1: ... contained water heating Moisture resistant control gauges Recirculating wash water Digital Control Information Center Removable dual filtration system Precision engineered spray patterns Versatile racking system One year parts and labor warranty Project Item No Quantity SD 20 LD 36 Champion Industries Inc P O Box 4149 Winston Salem NC 27115 Tel 336 661 1556 Fax 336 661 1979 2674 N Service Road Jo...

Page 2: ...lled wash temperature and low water protection system 25 gallons 14 gauge stainless steel sloped to drain Infrared gas and steam heating options available Filter Perforated removable stainless steel baskets Water Pump 5 H P 208 240 or 440 480 volt 1 phase or 3 phase 60 cycle with output of 100 gallons per minute at 35 to 45 P S I Digital Control Information Center 110 volt control circuit with pus...

Page 3: ...pe for manual or electrically operated ball valve for automatic option Optional Pumped Drain Automatic pump operation for elevated drain locations Complete with 1 14 HP 120 and Overflow volt 1 phase drain pump Wash tank completely drains when power is turned off Wash Pump 5 Hp 208 240 or 480 volt 1 phase or 3 phase 60 cycle Close coupled 100 gallons per minute at 35 to 45 psi mounted on 12 gauge s...

Page 4: ...r Propane Gas Heating Option 1 2 NPT Weight Crated 850 lbs Uncrated 600 lbs NOTE All weights are approximate Weights will vary depending on the number of options included with the machine Services 120 Volt 1 phase 5 running amps 15 amp service plus one of the following Champion Industries Inc P O Box 4149 Winston Salem NC 27115 Tel 336 661 1556 Fax 336 661 1979 www championindustries com 2674 N Se...

Reviews: