![background image](http://html.mh-extra.com/html/champion/u-h1/u-h1_technical-manual_2588549021.webp)
If a problem still exists after verifying the checklist, refer to the following
Troubleshooting Chart.
CONDITION
CAUSE
SOLUTION
Machine will not start
-Door not closed..................................Close door fully
-Main switch OFF ...............................Check breakers or fuses
Low or no water
-Main water supply OFF .....................Turn on house water supply
-PRV misadjusted or ..........................Set PRV to 138 kPa/20-22 PSI flowing
defective
pressure
Replace PRV
-Line strainer clogged .........................Clean line strainer
Water temperature low
-Incoming water temperature .............Raise temperature to:
when in use
at machine too low
70°C/180°F for U-H1
60°C/140°F for U-HB 40°F rise booster
43°C/110°F for U-HB 70°F rise booster
60°C/Min 120°F-(140°F Optimum) for U-LD
-U-LD machine left idle......................Drain and refill with fresh hot water
for extended period
(Optimum temperature 140°F)
-Thermostats out of
adjustment/defective .........................Readjust or replace thermostats
(U-H1/U-HB Only)
Insufficient pumped
-Clogged spray arms ...........................Clean spray arms and nozzles
spray pressure
-Sump filter clogged............................Must be kept clean and in place
Low final rinse temperature
-Low incoming water ..........................See Solution for (Water temperature low
temperature
when in use)
-U-LD set idle .....................................Drain and refill with fresh hot water
-Thermostat misadjusted .....................Adjust or replace booster thermostat
or defective (U-HB Only)
(U-HB Only)
Chemical not feeding
-No chemical in container ...................Replace or refill container
(U-LD Only)
-Feed tubes to/from .............................Clean obstruction and flush with hot water
chemical pump clogged
-Tubing kinked or split........................Straighten or replace tubing
Poor washing results
-Chemical pump defective ..................Contact your service agent
-Insufficient detergent .........................Check and fill supply
-Detergent setting low .........................Contact chemical supplier
-Wash water temperature ...................See water temperatures above
too low
-Wash arm clogged .............................Clean wash arm
-Improperly scraped dishes .................Check scraping procedures
-Ware improperly placed ....................Use proper racks. Do not overload racks.
in rack
-Improperly cleaned ...........................Check cleaning schedules
machine
-Electric element has ...........................Clean and/or delime
soil/lime build-up.
(U-HB, U-H1 Only)
19
TROUBLESHOOTING
Summary of Contents for U-H1
Page 6: ...4 NOTES NOTES ...
Page 58: ...56 REPLACEMENT PARTS Figure 25 Dishracks Strainer PRV 1 2 3 4 ...
Page 63: ......
Page 64: ......