![background image](http://html.mh-extra.com/html/champion/eseries-hru/eseries-hru_installation-operation-manual-with-service-replacement-parts_2588644009.webp)
3
Installation
Installation
Top View of the dishwasher unload section.
(HRU shown in gray)
C
L
HRU
Dishwasher Direction of Travel
A
B
B
B
B
B
B
B
Mounting
1.
Install the HRU after the dishwasher is completely assembled.
2.
Lift the unit with a forklift or a minimum of four persons capable
of positioning and lowering the HRU into its final position.
3.
Make sure the HRU vent inlet (A) is centered on the dishwasher.
4.
Install the mounting hardware installed in the installation kit from the
inside of the dishwasher hood to secure the HRU to the machine
5.
The mounting hardware (B) includes: (7) Hex hd. bolts 1/4-20 x 5/8",
(7) 1/4" split lock washers, and (7) 1/4" flat washers.
6.
Electrical power is prewired from the heat recovery control box to
the dishwasher main control cabinet to operate the HRU.
NOTE:
The HRU may have been mounted at the factory so the procedures
described below may not be required.
Summary of Contents for Eseries HRU
