Champion Eseries HRU Installation/Operation Manual With Service Replacement Parts Download

Page: 2 / 42

For future reference, record your dishwasher information in the box below.

Model Number__________________________ Serial Number_______________________

Voltage________________Hertz_____________ Phase__________________

Champion Service Agent __________________________________ Tel:______________________

Champion Parts Distributor _________________________________ Tel:______________________

ATTENTION:

The dishwasher model no., serial no., volt-

age, Hz and phase are needed to identify

your machine and to answer questions.

Please have this information on-hand

if you call for service assistance.

National Service Department

In Canada:

In the USA:

Toll-free: 800/ 263-5798

Toll-free: 800/ 858-4477

Tel:

905/ 562-4195

Tel:

336/ 661-1556

Fax:

905/ 562-4618

Fax: 336/ 661-1660

email: [email protected]

For all models:
The data plate mounts to one

side of the top-mounted

control cabinet.

The USGBC and the CaGBC Member Logos are trademarks owned by the U.S. Green Building Council

and The Canadian Green Building Council, respectively, and are used by permission.

The logos signify only that Champion Industries is a

USGBC member and a CaGBC member; USGBC and CaGBC do not review,

certify nor endorse the products or services offered by its members.

Summary of Contents for Eseries HRU











































Search results

Summary of Contents for Eseries HRU

Reviews:

Related manuals for Eseries HRU

Brands by name

Popular brands

Champion Eseries HRU, Installation/Operation Manual With Service Replacement Parts

Search results

Summary of Contents for Eseries HRU

Reviews:

Related manuals for Eseries HRU

Brands by name

Popular brands