![background image](http://html.mh-extra.com/html/champion/eseries-hru/eseries-hru_installation-operation-manual-with-service-replacement-parts_2588644008.webp)
2
Installation
Installation
HRU
Cold
Water In
Pre-heated
Water Out
Exhaust
Air
Exhaust
Air
Booster
Heat Recovery Unit (HRU) shown installed on a right-to-left dishwasher
without a Blower Dryer Option
NOTE:
The installation of the HRU must comply with local safety and health codes.
1.
The HRU weighs approximately 175 lbs./79.4 Kg and mounts on the top of the unload end
of the dishwasher.
2.
The unload exhaust vent of the dishwasher connects to the inlet of the HRU vent and is sealed
with gasket material which has already been installed on the dishwasher.
3.
The HRU is attached to the dishwasher by inserting fasteners from inside the dishwasher
into weldnuts mounted in the HRU. Mounting hardware is included in the installation kit.
!
CAUTION:
Metal edges in the HRU may be sharp. Use appropriate caution when
working on and in the vicinity of metal components
Receiving
Summary of Contents for Eseries HRU
