Parts
A)
Scroll wheel
B)
Control interface
C)
Working illuminator
D)
Clamp
E)
Max and Min water level
F)
Stainless steel skirt
G)
Water pump cap
EN
Parts
Setup
Clamp & pot
•
Sous Vide circulator requires a 6-15L container
or pot.
•
Firmly lock the product by clamping it on the side
of your container
Temp./timer
1.
Plug it into the outlet. The “ ” icon and working
lamp will fl ash and it will enter the standby mode.
Press the “ ” icon to enter the setting mode.
You will hear a sound of beep.
2.
Temperature setting: Slide the scroll wheel to set
the temparature.
3.
Time setting: Press the “ ” icon to set the time.
The timer blinks. First slide the scroll wheel to set
hour, then press “ ” again to set the minute.
The timer will countdown when it meets the setting
temperature.
4.
Press the “ ” icon to confi rm the setting and the
unit will start. If you want to change the setting,
press and hold the” ” icon for 3 seconds, and
then repeat the setting as above. The unit will stop
automaticlly when it runs out of time and an “END”
icon will show on the screen.
5.
Press and hold the “ ” iocn for 3 seconds to
stop.
NOTE
:If the unit is not immersed in water before starting
the error code ”EE1” will show on the display. Place
the unit in water and re-start.
Setup