EN
Champion ®
Makadamgatan 14 I 254 64 Helsingborg I Sweden
Designed in Sweden I Assembled in China
Error detection
If the vacuum power seems low, it can be due to the following:
1. The dust bag is full, change it.
2. There is a blockage in ground brush, hose or tubes. The machine can be re-operated only after the blockage is cleared away.
1. Big wheel
2. Power cord
3. ON/OFF switch pedal
4. Outlet board cover
5. Speed control button
6. Cord rewinding pedal
7. Indicator for full dustbag
8. Front cover
9. Lock clip
Attached list
A set of hose accessories: 2pcs plastic tube, one floor brush, one integrated brush.
Operation methods
1.
Connect the hose accessories: insert the hose end into the hose socket at the front cover and then hook it. (Fig1)
2.
Remove the hose accessories: press the adaptors at both side of the hose end and then pull the hose accessories. (Fig2)
3.
Connect the plastic tube to the curves end of the hose. (Fig3)
4.
Connect different nozzle tools to the tube for different cleaning purpose: floor brush (adjust to the type of ground) for
carpet or floor (Fig4,5); combine brush & nozzle for sofa, wall surface, curtain, corner or space between furniture and etc.
(Fig6)
Turn on the machine:
•
Insert the plug into the power socket, and press the on/off switch pedal, the machine will start working.
•
Cord rewinding: hold the plug and pull out the cord from the socket; press the cord rewinding pedal, the power cord
will be drawn in be drawn in.
Maintenance
Change the dust bag:
1.
When the indicator for dust bag turns red, it is time to replace it with a new bag. (Fig 1)
2.
Open the front cover. (Fig 1)
3.
Take out the full dust bag and remove it. (Fig 2)
Exchange the outlet filter:
1.
Clip down and remove the outlet cove (Fig 1,3)
2.
Clean the motor protection filter or replace it with a new one. (Fig 4,5)
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
1
2
3
4
5
6
7
8
9
