background image

  

Warranty 

Rev 64022-20100514 E

 

 

23

 

Warranty 

CHAMPION POWER EQUIPMENT 

1 YEAR LIMITED WARRANTY 
 

Effective September 1, 2006. Replaces all undated 
warranties and all warranties dated before September 1, 
2006. 

Warranty Qualifications 

Champion Power Equipment (CPE) will register this 
warranty upon receipt of your Warranty Registration 
Card and a copy of your sales receipt from one of CPE's 
retail locations as proof of purchase. 
Please submit your warranty registration and your 
proof of purchase within ten (10) days of the date of 
purchase. 

Limited Repair/Replacement 
Warranty 

CPE warrants to the original purchaser that the 
mechanical and electrical components will be free of 
defects in material and workmanship for a period of one 
(1) year from the original date of purchase (90 days for 
commercial & industrial use). Transportation charges 
on product submitted for repair or replacement under 
this warranty are the sole responsibility of the 
purchaser. This warranty applies only to the original 
purchaser and is not transferable. 

Do not return the unit to the 
place of purchase 

Contact CPE's Technical Service and CPE will 
troubleshoot any issue via phone or e-mail. If the 
problem is not corrected by this method, CPE will, at its 
option, authorize evaluation, repair or replacement of 
the defective part or component at a CPE Service 
Center.  CPE will provide you with a case number for 
warranty service. Please keep it for future reference.  
Repairs or replacements without prior authorization, or 
at an unauthorized repair facility, will not be covered by 
this warranty. 

Warranty Exclusions 

This warranty does not cover the following repairs and 
equipment: 

Normal Wear 

Semi-trash pumps need periodic parts and service to 
perform well. This warranty does not cover repair when 
normal use has exhausted the life of a part or the 
equipment as a whole. 

Installation, Use and 
Maintenance

 

This warranty will not apply to parts and/or labor if this 
semi-trash pump is deemed to have been misused, 
neglected, involved in an accident, abused, modified, 

installed improperly or connected incorrectly to any 
hose kit. Pumping chemicals, solvents, pesticides or any 
material other than clear water with solids not 
exceeding 3/16” in diameter only voids this warranty. 
Normal maintenance such as spark plugs, air filters, 
adjustments, fuel system cleaning and obstruction due 
to buildup is not covered by this warranty.  

Other Exclusions 

This warranty excludes: 
Cosmetic defects such as paint, decals, etc. 
Wear items such as filter elements, o-rings, etc. 
Accessory parts such as starting batteries, storage 
covers and hose kits. 
Failures due to acts of God and other force majeure 
events beyond the manufacturer’s control. 
Problems cause by parts that are not original Champion 
Power Equipment parts. 

Limits of Implied Warranty 
and Consequential Damage 

Champion Power Equipment disclaims any obligation 
to cover any loss of time, use of this product, freight, or 
any incidental or consequential claim by anyone from 
using this semi-trash pump. THIS WARRANTY IS IN 
LIEU OF ALL OTHER WARRANTIES, EXPRESS OR 
IMPLIED, INCLUDING WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE  
 
A unit provided as an exchange will be subject to the 
warranty of the original unit. The length of the warranty 
governing the exchanged unit will remain calculated by 
reference to the purchase date of the original unit. 
 
This warranty gives you certain legal rights which may 
change from state to state. Your state may also have 
other rights you may be entitled to that are not listed 
within this warranty. 

Contact Information 

Address 

Champion Power Equipment, Inc. 
Customer Service 
10006 Santa Fe Springs Rd. 
Santa Fe Springs, CA 90670 

Customer Service 

Mon – Fri 8:30 AM – 5:00 PM (PST/PDT) 
Toll Free: 1-877-338-0999 
Fax no.: 1-562-236-9429 

Technical Service 

Mon – Fri 8:30 AM – 5:00 PM (PST/PDT) 
Toll Free: 1-877-338-0999 
[email protected] 

Summary of Contents for 64022































Reviews: