![background image](http://html1.mh-extra.com/html/champion/64022/64022_owners-manual-and-operating-instructions_2589006014.webp)
Operation
10
Rev 64022-20100514 E
Insert quick coupler in the rigid suction hose
(Figure 3).
Figure 3
Fasten the quick coupler to the suction hose
with the hose clamp (Figure 4).
Figure 4
Wrap the 2” NPT inlet counterclockwise
with the Teflon tape provided (Figure 5).
Carefully thread the male connector to the
intake port.
Figure 5
Attach the quick coupler to the male coupler
(Figure 6) and lock in place with the cam
lock.
Figure 6
Attach the strainer to the intake hose and
secure with the hose clamp (Figure 7).
Figure 7
Remove the cap from the pump chamber
and completely fill the chamber with clean
water. Tighten the cap.
WARNING
DO NOT run the pump dry.
Running the pump dry can destroy the pump
seals and will void the warranty.
If the pump was running while dry, stop the
engine and allow it to cool thoroughly before
filling the chamber with water.
Summary of Contents for 64022
Page 2: ......
Page 4: ......
Page 20: ...Specifications 16 Rev 64022 20100514 E Parts Diagram...
Page 22: ...Specifications 18 Rev 64022 20100514 E Engine Parts Diagram...