![background image](http://html.mh-extra.com/html/champion/40911/40911_instruction-manual_2588284004.webp)
If you require parts or service assistance, please call the
CHAMPION TRAPS AND TARGETS Customer Service Dept.
at (800) 379-1732
©
2015 CHAMPION TRAPS AND TARGETS, Anoka, Minnesota 55303
2
II. Safety
WARNING! THIS MACHINE CAN CAUSE SERIOUS INJURY OR DEATH.
THOROUGHLY READ INSTRUCTIONS BEFORE INSTALLING OR OPERATING TRAP.
DO NOT STAND IN FRONT OF THE TRAP WHEN IT IS IN THE COCKED POSITION.
SERIOUS INJURY OR DEATH CAN RESULT.
THIS TRAP IS CAPABLE OF THROWING TARGETS A DISTANCE OF 75 YARDS. USE
ONLY IN AREAS WHERE THERE IS NO RISK OF HITTING A PERSON WITH THE
TARGET.
CAUTION! The EASYBIRD 6-PACKER Trap must be bolted down to the trailer or to a flat,
solid surface to eliminate any movement of the trap while operating! Do not install in an
area that does not allow safe access to the trap during loading and use. Provide ample
clearance around trap. The ON/OFF/SAFE RELEASE switch for the EASYBIRD 6-
PACKER Trap is located on the rear of the trap to allow the trap to be uncocked before
approaching it. Provide for safe access to the switch that will not require anyone to walk
in front of the trap to load targets or perform work on it.
WARNING! IF THERE IS A TARGET ON THE THROWING ARM, SAFE RELEASING THE
THROWING ARM WILL THROW THE TARGET. DO NOT STAND IN FRONT OF THE TRAP
WHILE SAFE RELEASING THE THROWING ARM.
1. (FIGURES 1, 2 & 3) Before performing any work or maintenance on the EASYBIRD 6-
PACKER Trap, check to see if the trap throwing arm is in the “cocked” position (FIGURE
2). If it is, move the throwing arm to the
uncocked
position (FIGURE 3) by momentarily
pressing the ON/OFF/SAFE RELEASE switch (FIGURE 1) to the “safe release” position,
and after the arm releases to the uncocked position, release the ON/OFF/SAFE RELEASE
switch allowing it to return to the “OFF” position.
2. Finally, remove battery cables from battery.
WARNING! THE ON/OFF/SAFE RELEASE
(MAIN POWER) SWITCH ON THE TRAP
MUST BE IN THE ‘OFF‘ (CENTER)
POSITION AND THE BATTERY
DISCONNECTED FROM THE TRAP BEFORE
PERFORMING ANY REPAIR,
MAINTENANCE OR ASSEMBLY.
FIGURE 1
ON/OFF/SAFE RELEASE (Main Power) Switch
Location