![background image](http://html.mh-extra.com/html/champion/40911/40911_instruction-manual_2588284010.webp)
If you require parts or service assistance, please call the
CHAMPION TRAPS AND TARGETS Customer Service Dept.
at (800) 379-1732
©
2015 CHAMPION TRAPS AND TARGETS, Anoka, Minnesota 55303
8
5. Mounting the Throwing Arm Path Indicator
1.
Attach the two (2) Front Tube Supports (D-1) to front sides of trap body
using the four (4) existing bolts in the lower front body (two on each side). Make
sure that warning labels are upright. Tighten all four (4) bolts on Front Tube
Supports securely.
2. Slide three (3) pieces of Arm Path Indicator Tubing (C) over ends of
Front Tube Supports and Rear Tube Support Studs at rear of trap body. This
ring indicates the approximate path of the Throwing Arm.
WARNING! FAILURE TO KEEP HANDS AND BODY OUTSIDE THE THROWING ARM
PATH INDICATOR AREA CAN RESULT IN SERIOUS INJURY OR DEATH FROM
BEING STRUCK BY THE THROWING ARM DURING USE.
CAUTION!
Do not lift trap by throwing arm path indicator, or front tube
supports, these were not designed to be a lifting point.
Front Tube
Supports
Rear Tube
Support Stud
Arm Path Indicator
Tubing