![background image](http://html.mh-extra.com/html/champion/40911/40911_instruction-manual_2588284017.webp)
If you require parts or service assistance, please call the
CHAMPION TRAPS AND TARGETS Customer Service Dept.
at (800) 379-1732
©
2015 CHAMPION TRAPS AND TARGETS, Anoka, Minnesota 55303
15
2. Loading the Magazine and Firing the Trap
WARNING! DO NOT STAND IN FRONT OF TRAP OR IN THE PATH OF THE
THROWING ARM SERIOUS INJURY OR DEATH MAY RESULT!
1. The throwing arm path indicator must be mounted properly before using trap.
2. Make sure that the trap is located to allow ample clearance around machine to allow for the
oscillating movement and to provide safe access to the rear of the trap during operation. It
must be located so that the user has safe access to the rear to operate the On/Off/Safe
Release switch and reload the trap without having to move in front of the trap at any time.
3. Make sure that the ON/OFF/SAFE RELEASE switch is in the “OFF” ( center ) position
(FIGURE 12) and the throwing arm is in the uncocked position (see page 2 and 3).
4. While standing at the rear of the trap, rotate the magazine assembly clockwise by hand
until an empty column is over the large drop hole in the top plate of the trap.
5. Load the magazine column to the left of this column with up to 25 targets (108mm standard
or 110mm international)
6. Rotate the magazine assembly clockwise until the column that was just loaded is halfway
over the large drop hole.
7. Load each of the remaining magazine columns with up to 25 targets Ensure that there is an
adequately charged 12VDC battery connected to the trap and that the remote release cord
is safely away from the trap.
8. Turn the ON/OFF/SAFE RELEASE switch to the “ON” position.
9. At this time the trap should cock the throwing arm.
10. Pressing the foot switch on the remote release will release the throwing arm, re-cock the
throwing arm and deliver a target to the throwing arm.
11.
If a target does not drop while the throwing arm is re-cocking, or the arm
continuously fires, the limit switch needs adjustment (see page 16)
WARNING! IF THERE IS A TARGET ON THE THROWING ARM, SAFE RELEASING
THE THROWING ARM WILL THROW THE TARGET. DO NOT STAND IN FRONT OF
THE TRAP.
12. When reloading the trap, first move the ON/OFF/SAFE RELEASE switch on the
EASYBIRD 6-PACKER Trap to the “Safe Release” position momentarily to uncock the
throwing arm and allow it to return to the ‘OFF’ position to turn power to the EASYBIRD 6-
PACKER Trap off. The trap magazine columns can then be safely reloaded with targets
from the rear of the trap.
FIGURE 12
6 Packer
ON/OFF/SAFE RELEASE
Switch