![background image](http://html1.mh-extra.com/html/champion/100192/100192_owners-manual_2589005017.webp)
14
100192
ENGLISH
Chemical Pump Storage
1. Allow the chemical pump to cool completely before
storage.
2. Turn off the fuel supply at the fuel valve.
3. Drain the pump chamber thoroughly.
4. Clean the chemical pump according to the
instructions in the Maintenance section.
5. Store in a clean, dry place out of direct sunlight.
Winter Storage
Protect your chemical pump parts from freezing.
1. Apply all storage instructions from previous sections.
2. Make sure chemical pump hose is free of all water
before storing for winter.
Engine exhaust contains odorless and colourless
carbon monoxide gas.
To avoid accidental or unintended ignition of the
product during periods of storage, the following
precautions should be followed:
– When
storing the chemical pump for short or
long periods of time
make sure that the Engine
Switch and the Fuel Valve are set in the
OFF
position.
DANGER
Our engines work well with 10% or less ethanol blend
fuels. When using blended fuels there are some issues
worth noting:
– Ethanol-gasoline blends can absorb more water than
gasoline alone.
– These blends can eventually separate, leaving water
or a watery goo in the tank, fuel valve and carburetor.
– With gravity-fed fuel supplies, this compromised fuel
can be drawn into the carburetor and cause damage
to the engine and/or potential hazards.
– There are only a few suppliers of fuel stabilizer that
are formulated to work with ethanol blend fuels.
– Any damages or hazards caused by using improper
fuel, improperly stored fuel, and/or improperly
formulated stabilizers, are not covered by
manufacture’s warranty.
It is advisable to always shut off the fuel supply, run the
engine to fuel starvation and drain the tank when the
equipment is not in use for more than 30 days.
NOTE
MAINTENANCE AND STORAGE