14
ENGLISH
RT10010
1. Place the wood chipper on a flat level surface.
2. Ensure the engine is switched OFF.
3. Remove the fuel cap from the top of the fuel tank (5).
4. Using a funnel, carefully fill the tank (5) with fuel (fig.
16).
5. Fasten the fuel cap and clean any spillage.
Drive Belt
To ensure optimum power from the engine the drive belt
must be in good condition and operate under proper
tension. To remove, install and inspect the drive belt
refer to the maintenance section of this instruction
manual.
Spark plug
– Use only the spark plug that is recommended for this
wood chipper.
– Make sure that the electrode is clean and the air
gap is correct (refer to the specs of the spark plug
manufacturer).
– To remove, install and inspect the spark plug refer
to the maintenance section of the engine instruction
manual.
Not all spark plugs for engines are the same.
CAUTION
Fig.16
Pre-oPeratIon cHecK