background image

REV 92208-20120717  

12

92208

 

ENGLISH

OPERATION

Log Splitter Operation Cont’d.

HORIZONAL position is used for lighter logs that can 
easily be loaded onto the beam .
VERTICAL position is used for light logs as well as 
heavy logs that are difficult to load onto the beam .
Back injury can result from lifting logs onto the log 
splitter if proper lifting techniques are not used .

NOTE

It is normal for the hydraulic fluid to become foamy 
or frothy during operation .

NOTE

If a log gets stuck, embedded or will not split 
completely, push the control handle in the reverse 
direction and allow the splitter to strip the log from 
the wedge .
ALWAYS keep hands clear of the log and wedge 
while it is retracting .

NOTE

Log Splitter Operation

1 .  ALWAYS wear ear and eye protection, protective clothing 

and safety gear .

2 .  Block tires and put both support legs in the DOWN 

position to prevent unintended movement of the log 
splitter during operation .

3 .  Set log splitter in either the horizontal or vertical 

position .

4 .  Load a log onto the beam against the end plate  

(MAX LOG LENGTH – 60 .3 cm {23 .75-in .}) .

5 .  Make sure all limbs are clear of crush zones .
6 .  Push the control valve handle forward (towards the 

end plate) to split the log .

7 .  Push the auto control valve handle backward to 

return the wedge to its original position .

8 .  Clear the split wood from the work zone .

Do not hold auto control valve in return position . It 
will damage the stop block or beam .

CAUTION

The cylinder stroke is designed so the wedge stops 
approximately 3 .81 cm (1 .5 in .) from the end plate .

NOTE

Summary of Contents for 92208





























Reviews: