200934 - BAckPAck BLOwER
IMPORTANT SAfETY INSTRUcTIONS
8
Operation Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
SYMBOL
MEANING
Choke.
Move choke lever to “RUN”
position. See Starting and Stopping
Section.
Choke.
Move choke lever to “CHOKE”
position. See Starting and Stopping
Section.
Quick Start Label Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
Starting the Engine
1.
Check fuel.
Make sure fuel-to-oil mixture is 50:1 and add if
necessary.
2. Move choke knob to
CHOKE
position.
3.
Primer bulb:
3a. For cold starts, press primer bulb 7-14 times.
3b. For warm starts, DO NOT press primer bulb.
4. Set cruise control lever to about 1/2 throttle position.
30
92
-L
-O
P-C
1
50 : 1
2
4
7-14X
3
6
8
30 s
5
1-6X
5
1-6X
2945
485
Colors
APN 3092-L-OP
Rev
C
Size
60 x 40 mm
Artwork Notes
3mm corner radius; 2mm safe margin; to be printed
on
white substrate.
Revision Changes
B-Changed choke direction
C-Changed the label size
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
K
K:50
152
5. Pull recoil handle 1-6 times.
6. Move choke knob to
RUN
position.
7. Pull recoil handle 1-6 times.
8. Allow the engine to idle for 30 seconds.
