200934 - BAckPAck BLOwER
SPEcIfIcATIONS
16
3. Inspect and replace or clean the air filter. To reassemble
make sure the filter fits in the cavity and reinstall the filter
as shown. Fasten the air filter cover by turning the fasteners
clockwise.
fuel cap
wARNING
Check for fuel leaks. If you find any leaks, correct the problem
before using the product. A leaking fuel cap is a fire hazard
and must be replaced immediately. Failure to do so could
result in a fire that could cause serious personal injury.
Spark Plug
1. Remove spark plug and check for worn and rounded center
electrode.
2. Clean, adjust or replace with a new spark plug per the gap
specifications below.
OEM Type
NGK-BPMR7A
Replacement Type
TORCH-L8RTC
Gap
0.024" - 0.028" (0.6 - 0.7 mm)
Maintenance Schedule
Follow the service intervals indicated in the schedule below.
Service your blower more frequently when operating in adverse
conditions. Contact our help line authorized service dealer. Time
intervals shown are maximum. Actual use and your experience will
determine the frequency of required maintenance.
BEFORE USE
Wipe up fuel leaks, fuel spillage.
Inspect and clean fuel tank.
EVERY 25 HOURS
Clean cylinder fins and intake cooling vent.
Inspect and clean the air filter.
EVERY 50 HOURS
Clean and readjust spark plug gap (gap: 0.6 - 0.7 mm
[0.024 - 0.028"]), and replace if necessary.
Clean exhaust port.
Inspect and clean the air filter.
ANNUALLY
Replace spark plug.
Storing The Blower
–
Clean all foreign material from the blower. Store unit indoors in
a dry, well-ventilated area that is inaccessible to children. Keep
away from corrosive agents such as garden chemicals and
deicing salts.
–
Abide by all local regulations for the safe storage and handling
of gasoline.
When storing 1 month or shorter:
–
Fuel stabilizer is an acceptable alternative in minimizing the
formation of fuel gum deposits during storage. Add stabilizer
to your fuel container (not the fuel tank on the blower). Run
engine at least 3 minutes after adding stabilizer.
When storing longer than a month:
–
Drain all fuel from tank into a container approved for gasoline.
Run engine until it stops.
SPEcIfIcATIONS
Backpack Blower Specifications
Model
......................................................
200934
Displacement
..................................................
42 cc
Type
........................................................
2-Stroke
Air Velocity*
............................
MAX 190 MPH (306 km/h)
.............................................
MAX 529 CFM (ft³/min)
Sound Pressure*
......................
75 dB(A) @ 50 ft. (15.2 m)
Effective Fuel Tank Capacity
.................
33.8 fl. oz. (1000 ml)
Fuel to Oil Mix Ratio
............................................
50:1
* Rated per ANSI/OPEI B175.2-2012
