background image

200934 - BAckPAck BLOwER

IMPORTANT SAfETY INSTRUcTIONS

7

Safety Symbols

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these 
symbols will allow you to more safely operate the product.

SYMBOL

MEANING

Read Operator’s Manual.

 To reduce the risk of injury, user must read and understand operator’s manual 

before using this product.

Eye and Ear Protection.

 Always wear safety goggles or safety glasses with side shields, and as 

necessary a full face-shield as well as full ear protection when operating this product.

Safety Alert.

 Precautions that involve your safety.

Risk of Fire/Explosion.

 Fuel and its vapors are extremely flammable and explosive. Fire can cause 

severe burns or death. Do not add fuel while the product is operating or still hot.

Open Flame alert.

 Fuel and its vapors are extremely flammable and explosive. Keep fuel away from 

smoking, open flames, sparks, pilot lights, heat, and other ignition sources.

Toxic Fumes.

 The engine exhaust from this product contains chemicals known to the state of California 

to cause cancer and birth defects and other reproductive harm.

Risk of Asphyxiation.

 This engine emits carbon monoxide, an odorless, colorless poison gas. Breathing 

carbon monoxide can cause nausea, fainting or death. Use only in a well ventilated area.

Thrown Objects. 

Beware of thrown objects.

Clearance.

 Keep all objects including others at least 50' (15.2 m) from this machine.

Hot Surface.

 To reduce the risk of injury or damage, avoid contact with any hot surface.

Rotating Impeller.

 Keep clear of blower outlet. Never point the blower at yourself or others.

Rotating Blades.

 Never put your hand in the chute. Contact with rotating parts can amputate fingers and 

hands.

Summary of Contents for 200934






















Reviews: