background image

100536 - 30 iN. 2-STAgE SNOwbLOwER

iMPORTANT SAfETY iNSTRUCTiONS

4

iMPORTANT SAfETY iNSTRUCTiONS

 

wARNiNg

Cancer and Reproductive Harm – www.P65Warnings.ca.gov

 

DANgER

Engine exhaust contains carbon monoxide, a colorless, 
odorless, poison gas. Breathing carbon monoxide will cause 
nausea, dizziness, fainting or death. If you start to feel dizzy or 
weak, get to fresh air immediately.

Operate product outdoors only in a well ventilated area.

DO NOT operate the product inside any building, including 
garages or sheds.

DO NOT allow exhaust fumes to enter a confined area through 
windows, doors, vents or other openings.

 

DANgER

Using an engine indoors 

CaN KILL YOU IN mINUTES

. Engine 

exhaust contains carbon monoxide. This is a poison you cannot 
see or smell.

NEVER

 use inside a home or garage, 

EVEN IF

 doors and 

windows are open.

ONLY

 use 

OUTSIDE

 and far away from windows, doors, 

and vents.

Install battery-operated carbon monoxide alarms or plug-in 
carbon monoxide alarms with battery back-up according to the 
manufacturer’s instructions.

 

DANgER

Rotating parts can entangle hands, feet, hair, clothing and/or 
accessories. Traumatic amputation or severe laceration can 
result.

Keep hands and feet away from rotating parts.

Tie up long hair and remove jewelry.

Operate equipment with guards in place.

DO NOT wear loose-fitting clothing, dangling drawstrings or 
items that could become caught.

 

wARNiNg

Sparks can result in fire or electrical shock.

When servicing the engine:

Disconnect the spark plug wire and place it where it cannot 
contact the plug.

DO NOT check for spark with the plug removed.

Use only approved spark plug testers.

 

wARNiNg

Running engines produce heat. Severe burns can occur on 
contact. Combustible material can catch fire on contact.

DO NOT touch hot surfaces.

Avoid contact with hot exhaust gases.

Allow equipment to cool before touching.

fuel Safety

 

DANgER

GaSOLINE aND GaSOLINE VaPORS aRE hIGhLY 
FLammaBLE aND EXPLOSIVE.

Fire or explosion can cause severe burns or death.

Gasoline and gasoline vapors:

 

Gasoline is highly flammable and explosive.

 

Gasoline can cause a fire or explosion if ignited.

 

Gasoline is a liquid fuel but it’s vapors can ignite.

 

Gasoline is a skin irritant and needs to be cleaned up 
immediately if spilled on skin or clothes.

 

Gasoline has a distinctive odor, this will help detect potential 
leaks quickly.

 

Gasoline expands or contracts with ambient temperatures. 
Never fill the gasoline tank to full capacity, as gasoline needs 
room to expand when temperatures rise.

 

In the case of any petroleum gasoline fire, flames should never 
be extinguished unless the fuel supply valve can be turned 
OFF. By not doing so, if a fire is extinguished and the supply 
of fuel is not turned OFF, an explosion hazard could be created.

When adding or removing gasoline:

 

DO NOT light or smoke cigarettes.

 

Turn the snowblower off and let cool for a minimum of two 
minutes before removing the gasoline cap. Loosen gasoline 
cap to relieve pressure from the gasoline tank.

Summary of Contents for 100536





























Reviews: