201185 - 4250W WIRELESS REMOTE START OPEN FRAME INVERTER
TROUbLESHOOTING
38
Problem
Cause
Solution
Engine is running but no AC
output.
Poor cord connection.
Check all connections.
Circuit breaker is open.
Reset circuit breaker. Check all circuit breakers.
Loose wiring.
Inspect and tighten wiring connections.
AC Overload: Button illuminated red
Reduce AC load and press Overload Reset Button until
illuminated green.
Other.
Contact the help line.
Engine hunts or falters.
Engine governor defective.
Contact the help line.
Dirty fuel valve.
Clean the fuel valve.
Carburetor is dirty and running lean.
Contact the help line.
Choke in wrong position.
Move choke until it stops under RUN position or push in
completely.
Repeated circuit breaker tripping.
Overload.
Review load and adjust. See “Connecting Electrical
Loads.”
Faulty power cords or device.
Check for damaged, bare or frayed wires. Replace
defective device.
Circuit breaker still too hot.
Let unit sit for 5 mins.
For other issues and technical support:
Technical Support Team
Toll Free 1-877-338-0999
[email protected]
