200990 - 4500W WIRELESS REMOTE START INVERTER GENERATOR
OPERATION
29
3. Press the “STOP” button on the remote.
NOTICE
Engine will shut off but the battery switch and EZ Start Dial
will remain in the “ON” position waiting for the next start
instruction.
To completely shut down the generator, make sure the EZ Start
Dial and battery switch are in the “OFF” position when the
generator will not be used for an extended period of time.
NOTICE
Battery power is drawn while the generator is in standby mode
(battery switch ON).
Do not leave generator in standby mode for an extended
period of time or the battery will be completely drained and
the wireless remote and electric start feature will no longer
function.
Manual Stop
1. Turn off and unplug all electrical connected loads. Never start
or stop the generator with electrical devices plugged in or
turned on.
2. Let the generator run at no-load for several minutes to
stabilize internal temperatures of the engine and generator.
3. Turn the EZ Start Dial to the “OFF” position.
4.
If battery switch is in the “ON” position,
press the battery
switch to the “OFF” position.
Important:
Always ensure that the EZ Start Dial and battery
switch are in the “OFF” position when the generator will not be
used for an extended period of time.
NOTICE
If the engine will not be used for a period of two (2) weeks or
longer, please see the Storage section for proper engine and
fuel storage.
Moving the Generator
–
NEVER lift or carry the generator using the folding handle.
–
ALWAYS place the generator on its wheels in the upright
position.
–
ALWAYS turn the generator off.
–
ALWAYS make sure engine and muffler are cooled down
before the generator can be handled safely (typically 15-30
minutes).
1. Begin by raising the folding handle, found on opposite side of
wheels.
2. Using the handle, tilt the end of the generator slightly off the
ground until balanced on the wheels.
3. While maintaining balance, roll the generator to the desired
location.
