1
2
4
5
6
7
8
9
10
11
3
14
13
15
12
114A3361
For Service Call
Installation Date
132A2900
RISK OF ENTRAPMENT
Repeat Safety Reverse Test monthly Door
must reverse on contact with a 40mm obstacle
placed on the floor Make necessary adjustments
AUTOMATIC DRIVE:
Keep away from the area of the door since it may
operate unexpectedly
EMERGENCY RELEASE:
To release pull down firmly on the red handle
OwnersCopy:SAVETHESEINSTRUCTIONSforfuturereference
CS100EVO
Sectional Garage Door Opener
Installation and Operating Instructions
This manual contains IMPORTANT SAFETY information
DO NOT PROCEED WITH THE INSTALLATION BEFORE READING THOROUGHLY
N2966
N2966
N2966
N2966
w w w .chamberlaindiy .com.au
ww w .chamberlaindiy .co.nz
CARTON INVENTORY
(1) Opener
(2) Hand held transmitter x 2
(3) Remote control visor mount
(4) Curved door arm
(5) Hanging bracket (2)
(6) Rail bracket
(7) Header bracket
(8) Door bracket
(9) Hardware bag
(10) Rail assembly
(11) C-Rail bracket (2)
(12) Centre Rail Bracket
(13) Manual
(14) Warning labels
(15) Warranty card
Your garage door opener and rail are packed in a single carton. The PowerLift Plus CS100EVO opener cartons contain the
opener, the rail, its fitting hardware and accessories.
2
RAIL DIMENSIONS
3
NOTE:
The Ceiling Fixing Point is measured back from the lintel (see item 1 to 7 of “completed installation”). Also
allow 400 mm back from the fixing point for installation of the powerhead (item 7 to 9 of “completed installation”).
3
DOOR HEIGHT:
Sectional Doors
BELT & RAIL
PART NUMBER:
RAIL LENGTH:
CEILING FIXING
POINTS:
Up to 2.2 m
8422 CR5
3000 mm segmented
2840 mm
