9
X
A
fig.1
fig.2
fig.3
fig.4
Item 8 in Hardware
Provided - Section 5
Item 10 in Hardware
Provided - Section 5
Item 8 in Hardware
Provided - Section 5
Item 10 in Hardware
Provided - Section 5
Item 3 in Hardware
Provided - Section 5
Item 4 in Hardware
Provided - Section 5
HANG THE OPENER
100-300 mm
1
A
The door bracket must be securely fastened to the frame
or a structural support on the door.
Mounting position for Sectional Doors with structural
centre support
1.Align the bracket on the centre line, measure down 100-
300 mm from the door top edge
.
2.Secure the bracket in this position, using the most
suitable variation of holes available.
Mounting Position for Sectional Doors with structural
Top Rail
1.Align the door bracket on the centre line on a structural
Top edge of the door.
2.Secure the bracket in this position, using the most
suitable variation of holes available.
Note: Use 18mm Screws (item 9 in Hardware Provided -
Section 5).
FASTEN DOOR BRACKET
15
16
The opener must be securely fastened to a sound
structural support above the opener.
1.Postion the opener as in the previous step. Check the rail
is centred over the door.
Ensure the rail brackets (fig.1) is on the Powerhead end of
the rail in a position as close to the opener as possible (X).
2.If mounting directly onto the ceiling, (fig.2) screw the
bracket directly into a structural support on the ceiling.
3.If hanging the opener below the ceiling, (fig.3) bend the
hanging brackets provided, and secure to both the ceiling
and the rail bracket.
4.If installing a segmented rail, a centre rail bracket is
supplied for installation in the mid position of the rail.
Simply slip both halves over the top of the rail (fig.4), and
secure to the ceiling, either directly or with hanging strips.
5.Check the opener is securely centred over the door.
Remove the 50 mm spacer, and any other assembly
tools. Operate the door manually and check for
unrestricted operation.
