4
Carton Inventory
Your garage door opener is packaged in one carton which contains the motor unit and all parts illustrated below. Accessories vary depending on the garage door opener model purchased. Depending on your
model, other accessories may be included with your garage door opener. Instructions for these accessories will be attached to the accessory and are not included in this manual. If anything is missing, carefully
check the packing material. Parts may be stuck in the foam. Hardware for assembly and installation is shown on the next page. Save the carton and packing material until the installation and adjustment is
complete. The images throughout this manual are for reference only and your product may look different.
A.
Header bracket
B.
Pulley
C.
Door bracket
D.
Curved door arm
E.
Straight door arm
(Packaged inside rail section)
F.
Trolley
NOTE:
Be sure to assemble the trolley
before sliding onto rail.
G.
Emergency release rope and handle
H.
Rail (1 front and 4 center sections)
I.
Hanging brackets (2)
(Packaged inside rail section)
J.
Garage door opener
K.
Sprocket cover and screws
L.
“U” bracket
M.
Belt
N.
Door control (Motion-Detecting Control
Panel or Smart Control Panel
®
)
O.
Remote control
P.
The Protector System
®
Safety reversing sensors with 2 conductor
white and white/black wire attached:
Sending Sensor (1), Receiving Sensor (1),
and Safety Sensor Brackets (2)
NOT SHOWN
White and red/white wire
Owner's manual
N
A
B
C
H
K
J
O
I
D
E
F
G
L
M
P
OR
Preparation
