8
HARDWARE
H3
Bolt
H2
Bolt 1/4"-20x1-3/4"
H4
Lock Nut 1/4"-20
H6
Nut 3/8"
H7
Lock Washer 3/8"
3.1
Lay the belt beside the rail, as shown.
Grasp the end with the hooked trolley
connector and pass approximately 12" (30
cm) of belt through the window. Keep the
ribbed side toward the rail, and allow it to
hang.
3.2
Remove the tape from the pulley. The
center should be greased, if not, regrease
the center of the pulley.
3.3
Insert the pulley into the window of the
front rail.
3.4
Insert the bolt (H3) into the rail and pulley.
Tighten securely with the lock washer (H7)
and nut (H6).
3.5
Rotate the pulley to be sure it spins freely.
3.6
Insert the bolt (H2) into the hole shown
and fasten with the lock nut (H4).
H6
H7
H4
Screwdriver
Rail
Pulley
Trolley
Connector
H2
H3
Assembly
3 Install the pulley
