Rev C
Doc
6001194
(01-20259)
1 of 36
SAFETY SUMMARY
It is imperative that everyone involved in the installation or operation of the LiftMaster model SL 1000-
X1 Slide Gate Operator reads the following warnings.
WARNING!
•
A vehicle gate is a large, heavy object that is moved by an electric motor. A moving
gate can cause serious injury or death! The safety and well-being of others depends
on the installation of a safe system.
•
Improper installation of a gate operator can result in a dangerous system.
•
Gate operators can present serious hazards to persons in the immediate area when
not controlled in a safe manner. Choose one or more controls that together will allow
complete control of the gate. Most importantly, the gate must be able to be stopped
at all times in case of emergency, and the emergency control should be conveniently
located, clearly marked and visible.
•
All controls must be kept out of the reach of small children. Serious injury or death
can result from children playing with the controls.
•
All controls should be located so the person operating them can see the full area of
gate movement.
•
Gate operators and associated control equipment should be installed by qualified
professional installers who should observe the following safe installation procedures:
1. Power should always be disconnected whenever installing, wiring or servicing a
gate operator. Moving chains in gate operators can catch clothing or fingers and
cause severe injury.
2. Installation of wiring should comply with local building and electrical codes.
3. All manual gate locks should be disabled to avoid damage to the gate or gate
operator should the lock become engaged after the operator is installed.
4. All operator controls and safety equipment should be tested at the conclusion of
installation to be sure they are functioning properly.
5. The operation of the gate controls and safety equipment should be reviewed with
the owner and/or end user of the automated gate system. They should also be
informed of the need to maintain control and safety equipment on a regular basis.
Safety equipment should be checked monthly to ensure it is working properly. All
installation manuals and safety information should be left with the owner.
6. Moving gates have pinch points and entrapment zones which can be extremely
dangerous to pedestrians, especially small children.
