r
T
rr
r
T
Example:
Year
Month
Day
24-Hour Time
1
2
3
4
5
6
7
9
8B
9B 9B
8
8A
Transmitters
Transmitters
Activate or Deactivate a Transmitter
98
Press Then
Enter Transmitter Number (1-65534). Then (#)
Enter Facility Code (0-255). Then (#)
Enter Sequence Code (0-2). Then (#)
Enter ID Number (0-26). Then (#)
Enter Button Number (1-4). Then (#)
Activate Transmitter (Enable-1 or Disable-0). Then (#)
To Activate or Deactivate a Transmitter:
Use Start Activation Date, (Enable-1 or
Disable-0). Then (#)
Start Date (yymmdd). Then (#)
Start Time (hhmm). Then (#)
Use End Deactivation Date, (Enable-1 or
Disable-0). Then (#)
End Date (yymmdd). Then (#)
End Time (hhmm). Then (#)
8
8A
8B
NOTE:
All time must be entered using a 24-hour format (8AM=0800, 3PM=1500 etc.)
Activate or deactivate a transmitter on a specific date and time.
Activate / Deactivate a Transmitter:
Disabling the Activate Transmitter
7
, the Card will always be deactivated. If you enable the Activate Transmitter
7
, then
the four
If
statements could apply:
1.
If
you disable the Start Activation Date
8
and disable the End Deactivation Date
9
and omit all dates and times, the
Transmitter will immediately become
active
and stay that way until the code is deactivated or deleted.
2.
If
you enable the Start Activation Date
8
and add only a "Start Date and Time"
8A 8B
and disable the End Deactivation
Date
9
, the Transmitter will
activate
on that "Start Date and Time".
3.
If
you disable the Start Activation Date
8
and enable the End Deactivation Date
9
and add only an "End Date and Time"
9A 9B
, the Transmitter will
deactivate
on that "End Date and Time".
4.
If
you enable the Start Activation Date
8
and add a "Start Date and Time"
8A 8B
enable the End Deactivation Date
9
and add an "End Date and Time"
9A 9B
, the Transmitter will
activate
on that "Start Date and Time" and
deactivate
on
the "End Date and Time".
9
9A
9B
Activates transmitter number "34432", facility code "25", sequence code "1", ID code "10", and button "1" activated
on February 1st, 2004 at 6PM.
Page 48
Verify a Transmitter
96
Audio Feedback "Invalid Step":
Indicates the transmitter code
Does Not
exist in the database.
Audio Feedback "Valid Step":
Indicates the transmitter code
Does
exist in the database.
Press Then
Enter Transmitter PIN Code (1-65534). Then (#)
Enter Facility Code (0-255). Then (#)
Enter Sequence Code (0-2). Then (#)
Enter ID Number (0-26). Then (#)
Enter Button Number (1-4). Then (#)
Example:
Then System Beeps
ONCE
1
2
3
4
5
6
Transmitter with PIN code "43323", facility code "1", sequence code "1", ID code "25", and button "1"
activated is
NOT
valid.
1
2
3
4
5
6
7
1
2
6
5
4
3
Summary of Contents for Elite EL Series
Page 74: ...Page 73 Notes...
Page 75: ...Page 74 Notes...
