Chamberlain Elite EL Series, Programming Manual

Page: 32 / 80

1 2 3
Disables the Do Not Disturb schedule for Directory Code "34".
Example:
Page 31
Director
y Codes
Director
y Codes
Enable or Disable Do Not Disturb Schedule
Do Not Disturb (DnD) Schedules prevent visitors from calling residents during
specified time frames. To assign a DnD Schedule to a Directory Code, use the
programming step for adding/editing a full function Directory Code (see page 29).
When enabling/disabling DnD Schedule for a Directory Code, the system will
remember the schedule assigned to the code.
Factory Setting: Disabled
Press Then
Enter Directory Code (1-4 digits). Then (#).
Enable (
1 ) or Disable ( 0 ). Call Forwarding. Then (#).
Enter Call Forward Schedule (0-63). Then (#)
0 =Never Use Call Forward Number
1 =Use Call Forward Number
4
Delete ALL Directory Codes:
201
Press Then
Enter Then
This will delete ALL Directory Codes from unit.
Important: Once you delete the Directory Codes, you cannot retrieve them unless they are
saved in Versa XS.
10
Press Then
Enter the Directory Code to be enabled or disabled. Then (#)
Enable (
1 ) or Disable ( 0 ). Then (#)
Enable or Disable Call Forwarding (Directory Calls)
46
Call Forwarding redirects visitor calls to another telephone number instead of the
regular phone number. During a Call Forwarding call, the visitor will hear normal
telephone line sounds but will not hear the number being dialed.
You can Enable or Disable the Call Forwarding Feature for a specific Directory Code
(Dial-Out).
Factory Setting: Disabled
1 2
Enables Call Forwarding number 555-3662 for Directory Code "14" with a use schedule of "2".
Example:
3 4 5 5A
3
Only Enter New Call Forward Phone
Number (up to 20 digits). Then (#)
(Skip this step to keep existing Call
Forward Phone Number)
Enter Call Forward Phone Extension (up to
5 digits). Then (#)
(If using an extension the unit
MUST have
a phone number).
5
5A
2
1
2
3
1
Factory
Settings
Call Forwarding Enable or Disable =
0
Call Forwarding Schedule = 0
1
2