Page 24
SetUP "Y
our Settings"
SetUP "Y
our Settings"
Assign "Each" Door Number to One or More Relays:
When a
valid
access code is used at an external access control device (Door), the unit
can be
set
to activate one or more relays.
Factory Settings: Door 1 Activates Relay 1; Door 2
Activates Relay 2; Door 3 Activates Relay 3; Door 4 Activates Relay 4
Step 3
61
Press Then
Enter the Door Number (1-4). Then (#)
Enter Relays to be Activated (0000-1111). Then (#)
0
=Deactivate,
1
=Activate (1st digit=Relay 4, 2nd digit=Relay 3, etc.)
Important:
1-3 must be performed
for
EACH
Door Number assigned
to the unit.
Example:
1
2
3
Relay 4 Relay 3 Relay 2 Relay 1
Deact
Deact Activate Activate
1
When a Resident uses a Valid Code at "Door 1", Relay "1" and Relay "2" will Activate
2
3
Assign Each External Access Control Device a "Door Number":
The units can be equipped with Wiegand reader and radio frequency (RF) modules that allow
your system to accommodate external access control devices such as a Wiegand-compatible
card readers (keypad) and RF receiver.
In order for Wiegand devices to work successfully, you
must assign them a "Door Number".
When a valid access codes is presented to the device, the
Assigned Door’s Relays
will activate.
Factory Setting:
Step 4
60
To perform these 4 steps you MUST know EXACTLY where the External Access Control
Device(s) are wired in "Your" unit! When page 13 and 23 are completed by you or your
installer, they will help you understand "Your" personal layout. If you do not know this,
DO NOT PROCEED. Consult your Installer and/or refer to the installation manual for
assistance.
Press Then
Enter External Access Control Device Number (1-4). Then (#)
Internal Keypad is ALWAYS Assigned to External Access Control Device Number 0
Assign a Door Number (1-4) to the Device. Then (#)
Important:
1-3 must be performed
for
EACH
external access control
device of unit.
NOTE:
A "Door Number" is a
number
you
assign to each
external access control device.
Only Wiegand devices may be
assigned to a door.
1
2
3
Device "1" is Assigned as Door "3".
Example A:
1
2
3
Device "3" is Assigned as Door "4".
Example B:
1
2
3
Door 1
Door 1
Main Keypad
Device 1
Door 2
Device 2
Door 3
Device 3
Door 4
Device 4
Summary of Contents for Elite EL Series
Page 74: ...Page 73 Notes...
Page 75: ...Page 74 Notes...
