2
Introduction 2-8
Safety symbol and signal word review ............................... 2
Preparing your garage door ............................................... 3
Tools needed ...................................................................... 3
Planning ......................................................................... 4-6
Carton inventory ................................................................. 7
Hardware inventory ............................................................ 8
Assembly
9-15
Assemble T-rail & attach the pulley bracket .................. 9-10
Install the trolley ............................................................... 11
Fasten the T-rail to the motor unit .................................... 12
Install the chain/cable and chain spreader .................. 13-14
Tighten the chain and cable ............................................. 15
Installation
15-28
Installation safety instructions .......................................... 15
Determine the header bracket location ....................... 16-17
Install the header bracket ................................................. 18
Attach the T-rail to the header bracket ............................. 19
Position the opener .......................................................... 20
Hang the opener ............................................................... 21
Install the door control ...................................................... 22
Install the light .................................................................. 23
Attach the emergency release rope and handle .............. 23
Electrical requirements ..................................................... 24
Fasten the door bracket .............................................. 25-26
Connect the door arm to the trolley ............................. 27-28
Adjustment 29-31
Adjust the travel limits ...................................................... 29
Adjust the force ................................................................ 30
Test the safety reversal system ....................................... 31
Operation 32-35
Operation safety instructions ............................................ 32
Using your garage door opener ....................................... 32
Using the wall-mounted door control ................................ 33
To open the door manually .............................................. 33
Care of your garage door opener ..................................... 34
Having a problem? ...................................................... 34-35
Programming 36-37
To add or reprogram a hand-held remote control ............ 36
To erase all codes ............................................................ 36
3-button remote controls .................................................. 36
To add, reprogram or change a Keyless Entry PIN ......... 37
Repair Parts
38
Accessories 39
Service Numbers
40
Warranty 40
TABLE OF CONTENTS
When you see these Safety Symbols and Signal Words on
the following pages, they will alert you to the possibility of
serious injury or death
if you do not comply with the
warnings that accompany them. The hazard may come
from something mechanical or from electric shock. Read
the warnings carefully.
When you see this Signal Word on the following pages, it
will alert you to the possibility of damage to your garage
door and/or the garage door opener if you do not comply
with the cautionary statements that accompany it. Read
them carefully.
Mechanical
Electrical
INTRODUCTION
Safety Symbol and Signal Word Review
This garage door opener has been designed and tested to offer safe service provided it is installed, operated,
maintained and tested in strict accordance with the instructions and warnings contained in this manual.
