5
ONE-PIECE DOOR WITH TRACK
Planning (Continued)
ONE-PIECE DOOR INSTALLATIONS
• Generally, a one-piece door does not require
reinforcement. If your door is lightweight, refer to the
information relating to sectional doors in Installation
Step 11.
• Depending on your door’s construction, you may need
additional mounting hardware for the door bracket
(Step 11).
Without a properly working safety reversal system,
persons (particularly small children) could be
SERIOUSLY INJURED or KILLED by a closing garage
door.
• The gap between the bottom of the garage door and
the fl oor MUST NOT exceed 1/4" (6 mm). Otherwise,
the safety reversal system may NOT work properly.
• The fl oor or the garage door MUST be repaired to
eliminate the gap.
ONE-PIECE DOOR WITHOUT TRACK
Header Wall
FINISHED CEILING
Support bracket & fastening
hardware is required.
See page 15.
Slack in chain
tension is normal
when garage
door is closed
Motor unit
Wall-Mounted
Door Control
Gap between fl oor and
bottom of door must not
exceed 1/4" (6 mm)
Gap between fl oor and
bottom of door must not
exceed 1/4" (6 mm)
Access
Door
Access
Door
Safety
Reversing Sensor
Safety
Reversing
Sensor
Safety Reversing
Sensor
Safety Reversing
Sensor
Straight
Door
Arm
Straight
Door
Arm
Emergency
Release
Rope
& Handle
Emergency Release
Rope & Handle
Header
Wall
Garage
Door
Header
Wall
Chain Pulley
Bracket
Chain Pulley
Bracket
Trolley
Trolley
Rail
Chain
Rail
CLOSED POSITION
CLOSED POSITION
Garage
Door
Door Bracket
Door
Bracket
Curved
Door
Arm
Curved
Door Arm
Header
Bracket
Header
Bracket
