Challenger MT700 Series, Service Manual, Page: 7 / 51

Introduction
2 79023976 B Rev.
IMPORTANT SAFETY INFORMATION
Most personal injuries occurring during product operation,
maintenance or repair are caused by failure to observe
basic safety rules and precautions. In most cases, an
injury can be avoided by recognizing hazardous situations
before an injury occurs.
A person must be alert to potential hazards. This person
should also have the necessary training, skills and tools to
perform these functions properly.
Improper operation, lubrication, maintenance or repair of
this product can be hazardous and could result in injury or
death.
Do not operate or perform any lubrication, maintenance
or repair on this product, until you have read and
understood the operation, lubrication, maintenance and
repair information.
Safety precautions and warnings are provided in this
manual and on the product. If these hazard warnings are
not heeded, bodily injury or death could occur to you or to
other persons.
Not every possible circumstance that might involve a
potential hazard can be anticipated. The warnings in this
publication and on the product are, therefore, not all
inclusive. If a tool, procedure, work method or operating
technique that is not specifically recommended by AGCO
is used, you must satisfy yourself that it is safe for you and
for others.
You must also make sure that the product will not be
damaged or be made unsafe by the operation, lubrication,
maintenance or repair procedures that you choose. The
information, specifications, and illustrations in this
publication are on the basis of information that was
available at the time that the publication was written.
The specifications, torques, pressures, measurements,
adjustments, illustrations, and other items can change at
any time. These changes can affect the service that is
given to the product. Obtain the complete and most
current information before you start any job. Challenger
dealers have the most current information available.

WARNING: When replacement parts are
required for this product AGCO
recommends using AGCO replacement
parts or parts with equivalent specifications
including, but not limited to, physical
dimensions, type, strength and material.
Failure to heed this warning can lead to
premature failures, product damage,
personal injury or death
Find manuals at http://best-manuals.com/search?&s=CHAL-79023971