F.200/TITAN 200/MAR 97
30
Proximity Switch Adjustment — See pg. 30.
Backgauge Squaring — See pg. 29.
YEARLY
Hydraulic Fluid — The hydraulic fluid should be
checked weekly and changed AT LEAST ONCE-A-
YEAR or after every 1,000 hours of operation. NOTE:
Failure to change oil when needed can damage seals in
the cylinders, pump, and valves.
Empty the hydraulic tank and refill with 1 gallon of
International Standards Organization Viscosity Grade
100 (ISO VG 100) rust, oxidation and foam inhibiting
hydraulic fluid.
NOTE: NEVER use automatic transmission fluid or
brake fluid as a substitute for the correct hydraulic fluid.
A table of various manufacturers and their equivalents
is listed below.
Recommended Oils
Oil Name
Distributor
Rykon No. 100
AMOCO
Duro AW Oil 465
Arco
AW Machine Oil 100
Chevron
Pacemaker XD No. 100
Citgo
Super Hydraulic 100
Conoco
Nuto H-100
Exxon
Harmony 100 AW
Gulf
HO 2A Hydraulic Oil
Lubriplate
DTE No. 18
Mobil
Pennzoil AW 100
Pennzoil
Magnus A Oil 215
Phillips
Tellus 100
Shell
Energol HLP 100
Sohio
Industron 100
Std. Oil
Indiana/Boron
Sunvis 851 WR
Sun Oil Co.
Rando HD 100
Texaco
Unax AW 100
Union Oil Co.
Knife Bar Link - Right Side, Lower
Knife Bar
Knife Cylinder Bracket, Upper (fig. 27)
Clamp Guide (fig. 28)
Clamp Guide (fig. 29)
Leadscrew and Backgauge Guide (fig. 30)
CAUTION: Use one of the
recommended oils or an ISO VG 100
Hydraulic Fluid equivalent only. Oils
other than the recommended type will cause
seals and O-rings to deteriorate. Unsafe
operating conditions will result.
NOTICE: UNSUPPORTED PRODUCT!
NO TECHNICAL SUPPORT AVAILABLE!
NO REPAIR PARTS AVAILABLE!