background image

HELPLINE NO 08454 505299

5

ORIGINAL INSTRUCTIONS

• Use only original batteries with 
   the voltage listed on the 
   nameplate of your power tool. 

   When using other batteries, e.g. imitations, 
   reconditioned batteries or other brands, 
   there is danger of injury as well as 
   property damage through exploding 
   batteries.

• Wear protective gloves when 

   

changing application 

   

tools/accessories. 

Application

   tools/accessories become hot after 
   prolonged usage.

• Do not scrape wetted materials 

   

(e. g. wallpaper) or on moist 

   

surfaces. 

Penetration of water into the 

   machine increases the risk of an electric 
   shock.

• Do not treat the surface to be 

   

worked with solvent-containing 

   

fluids. 

Materials being warmed up by the 

   scraping can cause toxic vapours to 
   develop.

• Exercise extreme caution when 
   handling the scraper. 

The accessory

   is very sharp; danger of injury.

SYMBOLS

To reduce the risk of injury, user

must read instruction manual

Warning

Wear eye protection

Wear ear protection

Wear dust mask

Indoor use only

Do not expose to rain or water

Do not burn

Do not dispose of batteries. Return

exhausted batteries to your local

collection or recycling point.

Double insulation

Waste electrical products should not

be disposed of with household waste.

Please recycle where facilities exist.

Check with your Local Authority or

retailer for recycling advice.

Li-Ion

Summary of Contents for PT110941















Reviews: