HELPLINE NO 08454 505299
11
ORIGINAL INSTRUCTIONS
4. SELECTING THE APPLICATION ACCESSORY
necessary, and press the new sandpaper in
place.(Fig C)
After considerable use the backing pad
surface will become worn, and the backing
pad must be replaced when it no longer offers
a firm grip. If you are experiencing
premature wear of the backing pad facing,
decrease the amount of pressure you
are applying during operation of the tool.
Fig C
The following table shows examples for application tools. You can buy other accessories from
Argos stores. Our multi tool can use both challenge xtreme and Bosch accessories.
50CrV
segment cut
blade
Wooden materials,
plastic, non-ferrous
metals
Separating and plunge cuts; also for sawing
close to edges, in corners and hard to reach
areas;
Example: shortening already installed bottom
rails or door hinges, plunge cuts for adjusting
floor panels
Accessory
Material
Application
HCS plunge
cut blade
Wooden materials,
soft plastics
Separating and deep plunge cuts; also for
sawing close to edges, in corners and hard to
reach areas;
Example: narrow plunge cut in solid wood for
installing a ventilation grid
Sanding pad
Wooden materials
Metal materials
For face sanding and planing small
Irregularities
Supplied with 2 x 80#, 100# ,120# sanding
paper
