HELPLINE NO 08454 505299
10
ORIGINAL INSTRUCTIONS
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ADJUSTMENTS
With this saw you can adjust: the blade cutting
depth and the mitre cutting angle.
1. CUTTING DEPTH ADJUSTMENT
1. To adjust the blade cutting depth, face the
saw away from you.
2. Loosen the cutting depth adjustment
knob which is located at the back of the saw
guard.
3. Hold the baseplate flat against the edge
of the workpiece and lift the main body until
the blade is at the required depth.
4. Firmly tighten the cutting depth adjustment
screw.
2. Mitre cutting
1. For mitre cutting undo the mitre cutting
adjustment knob which can be found at the
front of the metal base plate.
2. Twist the main body until the required
angle is reached. Use the mitre adjustment
guide to help set the required angle.
3. Tighten the screw to secure the
baseplate.
USING THE CIRCULAR SAW
1. SAFETY ON/OFF SWITCH
The switch is locked off to prevent
accidental starting. To operate the power
switch for use, squeeze the lock button (2)
and the power switch will operate freely.
When the power switch is then released it
will automatically become locked again
2
1
2. USING THE PARALLEL GUIDE
A parallel guide allows you to make
parallel cuts in sheets of wood which are
consistently the same width.
1. Slide the parallel guide into position.
2. Adjust the guide to the required width,
and secure by tightening the parallel guide
securing screw.
When you now use the saw, ensure that the
edge of the parallel guide is resting against
the edge of the wood to give a perfect
parallel cut.
3. OPERATION
Adjust the mitre angle and cutting depth
to the required level and place front of the
base plate on the workpiece (do not allow
the blade to touch the workpiece at this
time).
Start the saw, when the saw is at maximum
speed slowly push forward. Hold the saw
securely with both hands.
