Chapter 2
10
Optional Audio Mono-in/out Connector (CN4)
This connector is used for Add on Card e.g. modem with Mono
In/Out connector
AC3 Surround/ Bass Connector (CN4B)
This connector is for Surround and Bass speaker output
ext. Plug in the optional AC3 Surround/Bass jack
extension into this connector. The black colored jack is for
surround speaker output and the orange colored jack is for
bass speaker output.
Optional S/PDIF-in/out Connector (CN4C)
The S/PDIF-in/out connector supports the digital audio. This
connector must be connected to the cable from an external
device (i.e.2-channel decoded AC-3 from DVD decoders).
WOL (Wake-on-LAN) Connector (CN5)
Enable the Wake Up On LAN selection in BIOS's Power
Management Menu to use this function. The capability to remotely
manage PCs on a network is a significant factor in reducing
administrative and ownership costs. Magic Packet technology
is designed to give WOL capability to the LAN controller. This
header is used to connect an add-in NIC (Network Interface Card)
which gives WOL capability to the mainboard.
USB 0/1Ports and USB 2/3 Connector (USB1/CN6)
If you want to use a USB keyboard, you must enable the USB
keyboard support function in BIOS's Integrated Peripherals menu
(See Section 3-4). This board contains a USB Host controller and
includes a root hub with two USB ports (meets USB Rev 1.0
spec.) and a connector for optional USB Adaptor (USB2/3). Four
USB peripherals or hub devices are able to be connected.
Smart Card Reader Connector (CN7)
This connector must be connected to a Smart card
reader(Optional).
Smart Card Reader (Optional)
