CHAINTECH 9BJA, Manual

Page: 4 / 35

1
Introduction
Chapter 1
Introduction
1-1 Product Specifications
r r r r r Processor
- Supports Intel Socket 478 Pentium 4 processors
- System bus 400MHz
r r
r r
r Chipset
- Intel 845 + ICH2 chipset
r r
r r r DRAM Memory
- Three 168-pin DIMM sockets support up to 3 GB of SDRAM
- Supports PC-133 SDRAM
r r r r r Expansion Slots
- One Universal-AGP slot for both 2X/4XAGP at 1.5v (v2.0 compliant)
- Five 32-bit PCI slots (Rev 2.2 compliant)
- One CNR slot for modem, audio and LAN support
r r r r r Boot-Block Flash ROM
- Award System BIOS, supports PnP, APM, DMI, ACPI & Multi-device booting
features i.e. floppy, LS120, CD/DVD-ROM, HDD(IDE, SCSI), ZIP-ATAPI etc.
r r
r r r Embedded Ultra DMA-100 PCI IDE controller
- Supports two IDE ports up to 4 ATAPI devices
- Supports up to PIO Mode 4 up to 16.6MBps, Multi Mode 4 up to 66MBps
and Multi Word Mode 5 up to 100MBps with bus mastering
- Bus Mastering software drivers for common multi-task operating systems
r r r r r Onboard Ultra I/O
- ITE 8712 LPC with system monitoring hardware
- Three UARTs support two serial ports and IR function for HPSIR and ASKIR
- One parallel supports SPP/ECP/EPP
- One floppy disk drive connector supports up to 2.88MB, Japanese 3-Mode,
and 1Mbps transfer rates
r r r r r
Embedded
USB Controller
- Four USB ports (UHCI v1.0 compliant)
- Optional USB riser with additional 2 USB ports