CHAINTECH 6WIV0, Manual, Page: 4 / 29

1
Introduction
Chapter 1
Introduction
1-1 Product Specifications
! ! ! ! !
Processor
- Supports Intel Socket370 processors up to 850MHz
- Supports 66/100MHz system clocks
- High efficiency switching power modules with dual power delivery(VRM 8.4
compliant)
! ! ! ! !
Chipset
- Intel 810 (GMCH+ICH+FWH Whitney) three chip AGPset with 2D/3D graphics
controller
! ! ! ! !
DRAM Memory
- Two 168-pin DIMM sockets support up to 256MB SDRAM
- Supports 16/32/64/128MB, 64/72-bit unbuffered Synchronous DIMM modules
PC-100 certified SDRAM DIMM modules with SPD are required for
100MHz frequency clock speed
! !
! !
!" "
" "
"
Embedded 3D AGP VGA
- 3D Hyper Pipelined Architect w/ PDP, PPI
- Full 2D graphics up to 1600x1200x256c at 85Hz refresh
- Hardware Motion compensation assistance for S/W MPEG2 decode
- Integrated 24-bit 230MHz RAMDAC
- Optional 4MB SDRAM display cache (for GMH+ only)
! ! ! ! !" " " " "
Embedded Audio Subsystem
- AC`97 v2.1 compliant CODEC with SRC
! ! ! ! !
Embedded Ultra DMA-66 (ICH only) PCI IDE controller
- Two IDE ports support up to 4 ATAPI devices
- Supports up to PIO Mode 4 up to 16.6MBps, Multi-Word Mode 4 up to
66MBps with bus mastering
- Bus Mastering software drivers for all common multitasking operating
systems
! ! ! ! !
Embedded USB Controller with two USB ports (UHCI v.1.0 compliant)
! ! ! ! !
Expansion Slots
- One AMR slot (v 1.0 compliant)
- Three 32-bit PCI slots with master mode (Rev 2.2 compliant)
- One 16-bit ISA slots (optional)