CHAINTECH 6WIV0, Manual, Page: 20 / 29

Hardware Setup
17
WOL (Wake-on-LAN) Connector (CN10)
Enable the Wake Up On LAN selection in BIOS's Power
Management Menu to use this function. The capability
to remotely manage PCs on a network is a significant
factor in reducing administrative and ownership costs.
Magic Packet technology is designed to give WOL (Wake-
on-LAN) capability to the LAN controller. When a PC
capable of receiving wake up command goes to sleep, the
Magic Packet mode in the LAN controller is enabled.
When the LAN controller receives a Magic Packet frame,
the LAN controller will wake up the PC. This header is
used to connect an add-in NIC (Network Interface Card)
which gives WOL capability to the mainboard.
To support this function, a switching power supply
with a minimum of 750mA 5VSB is required.
USB(Universal Serial Bus) Ports
If you want to use a USB keyboard, you must enable the
USB keyboard support function in BIOS's Integrated
Peripherals menu . USB is an open industry standard,
providing a simple and inexpensive way to connect up
to 125 devices to a single computer port. Keyboards, mice,
tablets, digitizers, scanners, bar-code readers, modems,
printers and many more can all be used at the same time.
USB is a dynamically reconfigurable serial bus with an
elementary data rate of 12Mbps. Based on off the shelf,
low cost micro-controller technology, its modular layered
software protocol supports sophisticated devices and
application programs.
This board contains a USB Host controller and includes
a root hub with two USB ports (meets USB Rev 1.0 spec.).
Two USB peripherals or hub devices are able to be
connected.
+
+
+
+
+
+