manualshive.com logo in svg

CHAINTECH 6AJM2, Manual

The CHAINTECH 6AJM2 user manual is available for free download on our website. This comprehensive manual provides detailed instructions on using and configuring the product. Enhance your experience with the 6AJM2 by accessing the manual from manualshive.com for hassle-free and convenient reference.

Share
Download
background image

33

Awa

rd BIOS Setup Program

H. Power On By PCI Card

Enable this selection to use the Power on by PCI card function.

I.  Power On By Modem/LAN

When enabled, a modem/LAN that receives a signal will wake up the system
from soft off and green mode. You should connect the modem to the COM
port and turn on the resume event in green mode.

J. Power On By Alarm

When enabled, this setting allows the system to turn back on at a designated
time of the month.  User must designate date of month and time of day.  This
function is only available when using an ATX power supply and the Software
Power-Off function to turn off the computer.  See the Software Power-Off feature
in Section 2-4 of this manual for instructions.

6aja2m2-3.p65

2000/6/13, PM 03:35

33

Summary of Contents for 6AJM2























































Reviews:

No comments

Related manuals for 6AJM2

Cypress PowerSoC CY3267 Quick Start Manual preview
PowerSoC CY3267
Brand: Cypress Pages: 12
Gigabyte G1.Sniper B7 User Manual preview
G1.Sniper B7
Brand: Gigabyte Pages: 40
SOYO SY-7IWB User Manual preview
SY-7IWB
Brand: SOYO Pages: 95
IBASE Technology MI920 User Manual preview
MI920
Brand: IBASE Technology Pages: 65
NXP Semiconductors MPT612 User Manual preview
MPT612
Brand: NXP Semiconductors Pages: 269
ECS UM4980 User Manual preview
UM4980
Brand: ECS Pages: 46
IBASE Technology IB530 Series User Manual preview
IB530 Series
Brand: IBASE Technology Pages: 56
Avalue Technology EAX-Q87R User Manual preview
EAX-Q87R
Brand: Avalue Technology Pages: 82
JETWAY MM10-H6100 Technical Manual preview
MM10-H6100
Brand: JETWAY Pages: 43
DFI CA900-B User Manual preview
CA900-B
Brand: DFI Pages: 130
MSI P55 GD80 - Motherboard - ATX User Manual preview
P55 GD80 - Motherboard - ATX
Brand: MSI Pages: 150
Sundance Spas SMT327 User Manual preview
SMT327
Brand: Sundance Spas Pages: 21
Commell LV-678 User Manual preview
LV-678
Brand: Commell Pages: 53
Texas Instruments INA2180-2181 User Manual preview
INA2180-2181
Brand: Texas Instruments Pages: 20
ON Semiconductor ECLLQFP32EVB User Manual preview
ECLLQFP32EVB
Brand: ON Semiconductor Pages: 22
Foxconn 720MX Series User Manual preview
720MX Series
Brand: Foxconn Pages: 108
ON Semiconductor NCP1095GEVB User Manual preview
NCP1095GEVB
Brand: ON Semiconductor Pages: 5
sparkfun BeagleBone Black Proto Cape Hook-Up Manual preview
BeagleBone Black Proto Cape
Brand: sparkfun Pages: 4

Brands by name

Popular brands

Load more brands