CHAINTECH 6AJM2, Manual

Page: 20 / 54

15
Har dware Setup
CD-ROM Audio-in Connector (CN2)
Use the audio cable enclosed with your CD-ROM
disk drive to connect the CD-ROM to your
mainboard. This will enable your CD-ROM's
audio function.
Auxiliary CD-ROM Audio-in Connector (CN3)
Use the auxiliary audio cable enclosed with your
CD-ROM disk drive to connect the CD-ROM to
your mainboard. This will enable your CD-ROM's
audio function.
WOL (Wake-on-LAN) Connector (CN6)
Enable the Wake Up On LAN selection in BIOS's
Power Management Menu to use this function.
The capability to remotely manage PCs on a
network is a significant factor in reducing
administrative and ownership costs. Magic Packet
technology is designed to give WOL (Wake-on-
LAN) capability to the LAN controller. When a
PC capable of receiving wake up command goes
to sleep, the Magic Packet mode in the LAN
controller is enabled. When the LAN controller
receives a Magic Packet frame, the LAN controller
will wake up the PC. This header is used to
connect an add-in NIC (Network Interface Card)
which gives WOL capability to the mainboard.
To support this function, a switching power
supply with a minimum of 750mA 5VSB
standby signal is required.
L
1
R
G N D